VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 3
CONTENTS
3 STARTUP / CONFIGURATION
Initial startup 10
Configuring the EasyStart Timer 10
Opening the vehicle workshop menu 11
Selecting the settings for the standard configuration 11
– Selecting the temperature units – Item 2: 11
– Changing the preset operating time – Item 4.1: 11
– Resetting to as-delivered condition – Item 5: 12
– Setting the language – Item 8: 12
– Select departure time or start time – Item 10: 12
– Activating or deactivating automatic operating time calculation for water
heaters – Item 11.1: 13
– For automatic operating time calculation, copy the vehicle's engine size
(cubic capacity) – Item 11.2: 13
– For automatic operating time calculation, enter the operating time – Item 11.3: 14
4 WHAT TO DO IF …?
Possible displays in the event of a fault: 15
5 CIRCUIT DIAGRAM
– EasyStart Timer connection to Hydronic, Hydronic II, Hydronic II C, Hydronic II
Comfort, Hydronic M II 17
– EasyStart Timer connection to Airtronic, Airtronic M, Airtronic L 18
6 SERVICE
EC Declaration of Conformity 19
Hotline 19
To Next Page
Loading...
