VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 3
CONTENTS
Change the temperature setpoint and / or the operating time during operation 12
Set ventilation ON with Shortpress and if applicable set the operating time 14
Ventilation OFF with Longpress 15
Ventilation OFF with Shortpress 15
Add-on unit On – e.g. activate the HEATING function for a 2nd heater 16
Add-on unit On – e.g. activate the VENTILATION function for a 2nd heater 17
Add-on unit OFF with Longpress 19
Add-On Unit OFF with Shortpress 19
General information on programming the preset time 20
Program preset times 22
EasyStart Timer settings 22
Settings 26
4 WHAT TO DO IF …?
In the event of a fault the following displays are possible: 29
5 SERVICE
Hotline 30
To Next Page
Loading...
