Eberspächer EasyStart Timer - START DISPLAY AFTER SWITCHING ON

VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 9
3 OPERATION AND SETTING/ADJUSTMENT
START DISPLAY AFTER SWITCHING ON
17:30
21 °C
If no menu item is activated, the Start display
appears with a flashing heater symbol in the Menu
bar, with the current time and the actual temperature
in the status area.
Other possible actions are:
 HEATING IMMEDIATELY with LONGPRESS.
 HEATING ON with SHORTPRESS, in addition con-
firm and if applicable set the temperature setpoint
and operating time, see page 11.
 select a new menu item.
DISPLAYS FOR ACTIVATED MENU ITEMS
HEATING ON
60 min
21 °C
Other possible actions are:
 HEATING OFF, see page 10 and 12.
 select a new menu item.
VENTILATION ON
60 min
21 °C
Other possible actions are:
 VENTILATION OFF, see page 15.
 select a new menu item.
ADD-ON HEATER HEATING ON
90 min
Other possible actions are:
 ADD-ON UNIT HEATING OFF, see page 19.
 select a new menu item.
ADD-ON HEATER VENTILATION ON
90 min
Other possible actions are:
 ADD-ON UNIT VENTILATION OFF, see page 19.
 select a new menu item.