VEHICLE HEATERS – TECHNICAL DOCUMENTATION | 5
2 OVERVIEW
EASYSTART TIMER
The EasyStart Timer can be used to make the neces-
sary settings for operation of the heater and / or the
add-on unit.
BUTTON FUNCTIONS
LONGPRESS button
The button must be pressed for longer than 2 sec-
onds.
The heater is switched on immediately if ON or OFF
appears in the display (except if programming is run-
ning or while making settings).
SHORTPRESS button
The button must be pressed for less than 2 seconds
– if the display shows OFF EasyStart Timer ON,
the Start display appears.
– a selected function is confirmed.
– inputs are confirmed.
LONGPRESS button
The button must be pressed for longer than 2 sec-
onds
– all functions are ended.
– if the display shows OFF EasyStart Timer ON,
the Start display appears.
SHORTPRESS button
The button must be pressed for less than 2 seconds
– the displayed, activated function is ended, other
activated functions are retained.
– with each SHORTPRESS the display changes to a
next-higher level up to EasyStart Timer OFF.
– the Start display appears and no function is active:
EasyStart Timer OFF.
– EasyStart Timer is in submenu the setting is
exited, already set values are not saved.
– if the display shows OFF EasyStart Timer ON,
the Start display appears.
Press
button 1x / keep pressed
– EasyStart Timer is in the Main menu and the Start
display appears in the Menu bar the next, right-
hand symbol appears in the middle and flashing.
– EasyStart Timer is in the submenu, the dis-
played value is changed (larger), or the next selec-
tion is displayed.
– if the display shows OFF EasyStart Timer ON,
the Start display appears.
Press
button 1x / keep pressed
– EasyStart Timer is in the Main menu and the Start
display appears in the Menu bar the next, left-
hand symbol appears in the middle and flashing.
– EasyStart Timer is in the submenu, the dis-
played value is changed (smaller), or the next
selection is displayed.
– if the display shows OFF EasyStart Timer ON,
the Start display appears.