Need help?Do you have a question about the eBike C961 and is the answer not in the manual?
Overview of C961 display functions: PAS levels, Walk Assist, odometer, backlight, speed, battery capacity, and error codes.
Details the control pad with Power, Plus, and Minus buttons for operating the display functions.
Explains the display elements: Battery Capacity, Pedal Assist (PAS) Level, Walking, and Time.
Describes how the battery gauge estimates capacity based on real-time voltage and riding conditions.
Instructions for turning the unit on/off and adjusting Pedal Assist levels using the control pad.
How to activate and use Walk Assist mode for low-speed motor assistance while walking.
Guides for controlling the backlight/headlight and resetting the TRIP distance.
How to set the speed unit (Km/h or Mile/h) and adjust the speed limit.
Instructions for adjusting backlight brightness and setting the clock time.
Setting the correct wheel size for accurate speed and TRIP data, and configuring auto-off timer.
How to select the number of pedal assist levels (3, 5, or 9) for motor power distribution.
List of error codes (e.g., 04/05, 06, 07, 08, 10/11, 12, 21, 22, 30) and their definitions.
General| Brand | eBike |
|---|---|
| Model | C961 |
| Category | Bicycle Accessories |
| Language | English |
To Next Page
