INTRODUCTION
The C961 display includes the functions shown below:
• Multiple Power Assist Levels
• Walk Assist (slow speed motor assist)
• Distance and Odometer (TRIP/TOTAL)
• Backlight / Headlight
• Speed based on current riding conditions
• Battery Capacity (Not accurate for determining remaining range or capacity)
• Error codes
• Operating temperature -4°F to 140°F
• No voltage meter
• No power or watt meter
• Not waterproof or water resistant
BUTTONS
CAUTION
INTRODUCTION & BUTTONS
Includes control pad with three button electronic switch.
Bolts provided with display are:
4 – M4 – 0.7 x 8mm (Mount bracket hardware)
2 – M3 – 0.5 x 6mm (Control pad hardware)
Do not overtighten plastic brackets or they will break!
The unit is not water resistant so protect it from water and other liquids.
Avoid collisions to prevent damage or malfunction.
Notes:
2
C961 MANUAL © Copyright Ebike Essentials. All Rights Reserved.
www.Bafangusadirect.com
Power on/off button
Plus button
Minus button
To Next Page
Loading...
