EasyManua.ls Logo

EBIKELING S830 User Manual

EBIKELING S830
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
LCD S830 User Manual
Question and Answer IconNeed help?

Do you have a question about the EBIKELING S830 and is the answer not in the manual?

EBIKELING S830 Specifications

General IconGeneral
BrandEBIKELING
ModelS830
CategoryMonitor
LanguageEnglish

Summary

Exterior Parameters

Casing and Display Materials

Describes ABS casing and high hardness acrylic display materials.

Single Supporter Dimensions

Details the dimensions and mounting of the single supporter.

Converter Ring Diameter

Specifies the diameter of the converter ring for handlebar mounting.

Operating Voltage and Connections

Supported Operating Voltages

Lists the DC voltage ranges supported by the control panel.

Connector Type

Identifies the Julet Waterproof Connector used for connections.

Display and Control Functions

Display Features

Covers speed, motor power, battery level, error indications, and time displays.

Control and Settings Overview

Explains power switch, inching, wheel diameter, top speed, and other settings.

PAS and Speed Display

Details PAS gear modes, maximum/average speed, and unit settings.

Vehicle Status Indicators

Covers walk boost, powered ride, low battery, and failure notifications.

Parameter Settings Guide

Instructions on accessing and configuring system parameters like brightness and sleep time.

Key Operations and Settings

Key Arrangement and Introduction

Describes the panel keys and their functions for short and long presses.

Changing Assist Power

Explains how to increase or decrease the assist power using buttons.

Switching Display Readings

Details how to cycle through different information on the multi-function display.

Cruise and Light Control

How to enable/disable 6km/h cruise, real-time cruise, and turn lights on/off.

LCD Display On/Off

Instructions for turning the LCD display panel on and off.

Parameter Setting Interface

Guide to entering and navigating the parameter setting mode using buttons.

Saving Parameter Changes

Explains how to save modified parameters or the auto-save function.

Related product manuals