EasyManua.ls Logo

EBS Billy Sheehan Ultimate Signature Drive User Manual

EBS Billy Sheehan Ultimate Signature Drive
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USERS MANUAL
EBS BILLY SHEEHAN ULTIMATE SIGNATURE DRIVE
www.ebssweden.comwww.ebssweden.com
Question and Answer IconNeed help?

Do you have a question about the EBS Billy Sheehan Ultimate Signature Drive and is the answer not in the manual?

EBS Billy Sheehan Ultimate Signature Drive Specifications

General IconGeneral
TechnologyAnalog
Inputs1 x 1/4"
Outputs1 x 1/4"
Input Impedance1 MΩ
Power Source9V DC
Current Draw25 mA
BypassTrue Bypass
TypeOverdrive
Weight1 lbs

Summary

Thank You and Introduction

The Controls Explained

Drive Control

Sets the gain for the classic overdrive engine, from subtle to high gain tone.

Tone Control

Fine tunes the desired frequency scoop, ranging from lower to higher midrange.

Level Control

Sets the level for the drive channel, post Drive Loop and before the compressor.

Clean Level Control

Sets the level for the clean channel, post Clean Loop and before the compressor.

Frequency Switch

Moves the frequency scope of the Tone control to expand the palette of sounds.

Compression Switch

Controls the compressor, post loops and channels mix point. Options: OFF, MID, HIGH.

Phase Switch

The INVERTED position retains more bottom to the sound when using the drive.

Footswitch Operations

Boost Footswitch

Boosts the Drive gain level when activated.

Active Footswitch

Switches the pedal on or off.

Advanced Options and Power

Advanced Control Options

Details on replaceable op-amp chip and trimmer controls for boost, threshold, and compression.

Power Options

Information on using DC power adapters and batteries for pedal operation.

Using the Loops

Block Diagram

Technical Specifications

Related product manuals