Need help?Do you have a question about the EBS OCTABASS and is the answer not in the manual?
General| Inputs | 1 x 1/4" |
|---|---|
| Outputs | 1 x 1/4" |
| Type | Octave Pedal |
| Input Impedance | 1 Mohm |
| Power Supply | 9V DC (center negative) |
| Dimensions | 2.8 x 4.5 x 1.4 inches |
| Weight | 0.9 lbs |
Controls mix volume for bypassed sound and octave divided signal.
HIGH for synthesized sound, MID for classic octave, LOW for sub-bass.
Indicates pedal status and switches the pedal on/off.
Recommends EBS AD-9+ for 9-12 V DC, 2.1 mm center negative.
Instructions for inserting a 9V battery into the pedal.
Classical sound using high Normal and moderate Octave settings.
Adds low-end rumble with high Octave and balanced Normal.
Synthesized sound in High range, good for soloing.
Ensure cables and 1/4" plugs are properly connected.
Check battery status or DC adapter voltage and polarity.
Confirm instrument functionality and amplifier volume.
Details nominal input level, impedance, and bandwidth.
Lists dimensions (width, height, depth) and weight.
Specifies power requirements and overvoltage protection.
Provides contact details for support if issues are not resolved.
To Next Page
