Need help?Do you have a question about the EBS Multidrive and is the answer not in the manual?
General| Power Source | 9V DC power supply (not included) |
|---|---|
| Effect Types | Overdrive, Distortion, Fuzz |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Controls | Mode switch |
| Number of Channels | 1 |
| MIDI Compatibility | No |
| Dimensions | 4.7" x 3.9" x 2.2" (120 x 100 x 55 mm) |
| Weight | 1.1 lbs (0.5 kg) |
Configures pedal operation based on instrument type or effects loop setup.
Adjusts the amount of gain/distortion from clean to heavily distorted.
Sets the output volume level, can be used for sound boosting.
Selects between Tubesim, Standard, or Flat modes for tonal shaping.
Engages or disengages the pedal's effect.
Details recommended DC power supply specifications and connector type.
Instructions for installing a 9V battery for pedal operation.
Example setting for a clean, edgy overdrive with good low-end definition.
Example for full-range distortion with compression and fuzz-like character.
Example for higher compression, less attack, and tube-like warmth.
To Next Page
