USERS MANUAL
EBS MULTIDRIVE - STUDIO EDITION
www.ebssweden. com
TECHNICAL SPECIFICATIONS EBS MULTIDRIVE Studio Edition
Nominal Input Level - 8 dBv (active) or
- 20 dBv (passive)
Input Impedance 700 kohms
Dry Bandwidth +0/-3 dB 20 - 20k Hz
Effect Bandwidth +0/-3 dB 35 - 12k Hz
Drive Gain Range 0 - 60 dB min
Modes Standard, Flat or Tubesim
Dimensions Width 70 mm (2.8”)
Height 115 mm (4.5”)
Depth 35 mm (1.4”)
Weight 400g (0.88 lb.)
Power Requirements 9 - 12 V DC Regulated, 30 mA max.
Protected against accidental over voltage up to 18 V.
Specifications are subject to change without notice.
If you did not find the answer in this manual, please contact
EBS at support@ebssweden.com
To Previous Page
Loading...
