Need help?Do you have a question about the EBS DynaVerb and is the answer not in the manual?
General| Technology | Digital |
|---|---|
| Modes | Room, Plate, Hall |
| Type | Reverb |
| Power Supply | 9V DC (center negative) |
| Input | 1/4" |
| Output | 1/4 inch jack |
| Input Impedance | 1 MOhm |
| Output Impedance | 100 Ohm |
| Controls | Reverb, Tone |
Sets the amount of the reverb effect to be mixed with the dry signal.
Controls the high end timbre or treble tone of the reverb effect.
Selects one of eight different stereo reverb effect types.
Indicates when the pedal is switched on.
Switches the pedal on or off.
Recommends using a DC Power Supply like the EBS AD-9+ for constant use.
Explains battery usage and steps for installing a 9V battery.
How to set the pedal to parallel mode for rack effects unit use.
Example setting for short reverb time, useful for effect playing.
Useful classic reverb, similar to old reverb tanks.
Dramatic reverb with long reverb time and stereo depth.
To Next Page
