EBS NEO GORM User Manual

SPECIFICATIONS
ebs.sweden@bass.se
www.ebssweden.com
October 2007
EFFECTS LOOP: Loop Signal Level nominal -10 dBv
Gain Unity (1:1)
Output Impedance (Send) <100 ohms
Input Impedance (Return) 10 kohms
Loop Mode 0 – 100% blend
Phantom Power optional 10V, 25 mA
REMOTES: Connection: REMOTE JACK: RING = Mute
TIP = Drive
FILTER JACK: RING = Filter Section
TIP = Character
Function: Connect to GND
for bypass.
Threshold 0.7 V
Current 8 mA suitable for LED
TUNER OUT: Output Impedance: < 25 kohms
Signal Level As Instrument
POWER AMP: Continuous/Dynamic Output Power 300 / 350 W RMS
@ 4 or 2 ohms load
CABINET: Speaker type Woofers Neodymium
Impendance (total) 4 ohms
Crosssover Freq. 4.5 kHz
Volume NG-210 (2x 10”) 59 l
NG-115 (1x 15”) 73 l
NG-212 (2x 12”) 86 l
AUXILIARY INFO: Power Requirements max 400 W
Mains Protection: T3.15A Fuse (230V)
T6.3A Fuse (100/120V)
Dimensions (WxDxH): NG-210 58 cm x 37 cm x 52 cm
23” x 15” x 21”
NG-115 58 cm x 37 cm x 61 cm
23” x 15” x 24”
NG-212 58 cm x 37 cm x 70 cm
23” x 15” x 28”
Caster height add 6,5 cm (2.6”)
Weight: NG-210 31 kg (69 lbs.)
NG-115 30 kg (67 lbs.)
NG-212 35 kg (78 lbs.)
Specifications are subject to change without notice!
MADE IN SWEDEN BY EBS SWEDEN AB

FRAMNÄSBACKEN 12, SE-171 66 SOLNA, SWEDEN

+46-8-735 00 10, FAX : +46-8-735 00 15
PROFESSIONAL 350W NEODYMIUM BASS COMBO
CONTENTS: PAGE: PAGE:
INTRODUCTION
2
BAL.OUT • SPEAKER SIMULATOR
11
GETTING STARTED
2-3
EFFECTS LOOP • REMOTES
12
INPUT • PHANTOM • GAIN
4
LINE OUT • TUNER OUT
13
COMP/LIMIT
5
POWER AMP
13
CHARACTER • FILTERS
6-7
BLOCK DIAGRAM
14
SAMPLE SOUND SETTINGS
8-9
SPECIFICATIONS
15-16
DRIVE • VOLUME • STANDBY
10

EBS NEO GORM Specifications

General

Technology	Solid State
Channels	1
EQ	4-band EQ
Effects Loop	Yes
Type	Bass Amplifier
Line Out	Yes
Speaker Outputs	1 x Speakon
Impedance	4Ω or 8Ω

Summary

Specifications

Effects Loop

Details on the effects loop, including signal level, impedance, mode, and phantom power.

Remotes

Information on remote connections and functions for external control.

Tuner Out

Specifications for the tuner output, including impedance and signal level.

Power Amp

Details on the amplifier's output power, speaker type, impedance, and crossover frequency.

Cabinet

Specifications for cabinet dimensions and weight for different models.

Auxiliary Info

Includes power requirements, mains protection, and dimensions.

Users Manual

Introduction

Welcome message and overview of the EBS NeoGorm bass combo's features.

Getting Started

Step-by-step guide for unpacking, setting up, and basic operation of the bass combo.

Input

Details on the low noise, high impedance instrument input and phantom power system.

Gain

Control to adjust instrument signal strength to the right operating level for signal processing.

Line Out

Fullrange output for driving multiple poweramps, extending system power.

Tuner Out

Low impedance output suitable for driving tuners, identical to instrument signal.

Power Amp

Internal MOSFET power amp with natural sound reproduction and high power output.

Effects Loop

Details on the effect loop for external units and the FX Mix control for effects level.

Remotes

Information on remote jacks for foot switches and mute function control.

Compressor/Limiter

Description of the compressor/limiter function, controls, and LED indicators for dynamic sound tightening.

Character Filters

Details on the preshaping filter 'Character' and the four enhanced performance filters (Bass, Middle, Treble, Bright).

Balanced Output Speaker Simulator

Information on the high-quality balanced output and the integrated speaker simulator feature.

Drive Volume Standby

Explanation of the Drive, Volume, and Standby controls and their respective functions.

Sample Sound Settings

Examples of control settings for various playing styles like Allround, Heavy, Funky, Slap, and Fretless.