EBS TD650 User Manual

SPECIFICATIONS
E-MAIL: ebs.sweden@bass.se
WEB: http://www.ebs.bass.se
April 2002
BALANCED OUTPUT: Output Level nominal - 10 dBv
Output Impedance < 10 ohms current lim.
Frequency Response +0/-3 dB 35 - 20k Hz
Dynamic Range: linear/A-w. 102/105 dB typ.
XLR Connections 1-GND, 2-Hot, 3-Cold
Options Pre/Post Eq, GND Lift,
Speaker Simulator
EFFECTS LOOP: Loop Signal Level nominal -10 dBv
Gain Unity (1:1)
Output Impedance (Send) <100 ohms
Input Impedance (Returns) 47 kohms // 100 pF
Phantom Power optional 10V, 20 mA
TUNER OUT: Output Impedance: < 25 kohms
Signal Level As Instrument
LINE OUT: Output Impedance < 5 kohms
Nominal Signal Level 0 dBv
AMP INPUT: Input Impedance 10 kohms
Sensitivity 32 dB (40x)
POWER AMP: Continuous/Dynamic Output Power 400 / 460 W RMS
@ 4 ohms Impedance
530 / 650 W RMS
@ 2 ohms Impedance
AUXILIARY INFO: Power Requirements max 700 W
Mains Protection: T5A Fuse (230V)
T10A Fuse (100/120V)
Dimensions (WxDxH): 48 cm x 36 cm x 13 cm
19” x 14” x 5.2”(3U)
Weight: 12 kg ( 27 lbs.)
Specifications are subject to change without notice!
EBS TD650
MADE IN SWEDEN BY EBS SWEDEN AB

FRAMNÄSBACKEN 12, SE-171 66 SOLNA, SWEDEN

+46 8 735 00 10, FAX : +46 8 735 00 15
U SERS M ANUAL
PROFESSIONAL 650W TUBE DEFINITION BASS HEAD
CONTENTS: PAGE: PAGE:
INTRODUCTION
2
VOLUME • BAL.OUT
11
GETTING STARTED
2-3
EFFECTS LOOP
12
INPUT • GAIN
4
TUNER OUT • LINE OUT • AMP IN
13
COMP/LIMIT
5
CHARACTER • FILTERS
6-7
POWER AMP
13
SAMPLE SOUND SETTINGS
8-9
BLOCK DIAGRAM
14
DRIVE
10
SPECIFICATIONS
15-16

EBS TD650 Specifications

General

Brand	EBS
Model	TD650
Category	Amplifier
Language	English

Summary

Introduction

Getting Started

Block Diagram

Input Gain

Outputs and Power Amp

Tuner Out

Low impedance output for driving tuners. Signal is identical to instrument signal.

Line Out

Full-range output suitable for driving multiple poweramps.

Amp Input

Direct input to the power amplifier, bypassing the volume control.

Poweramp

MOSFET design with natural sound, high power, and soft clip.

Effects Loop

Compressor/Limiter

Character Filters

Bass Filter

Shelving type 12dB/oct filter with wide gain range.

Middle Filter

Extended range 50-3k Hz with notch function at minimum setting.

Treble Filter

Bell type filter peaking at 5 kHz for mids and treble.

Bright Filter

Advanced high pass filter for bright treble timbre.

Volume and Balanced Output

Volume

Controls all volume through the poweramp and LINE output.

Balanced Output

High quality, electronically floating output for signal transfer.

Drive

Boost Drive

Switch for two overdrive types: linear gain or bypassed frequencies below 350 Hz.

Tube Mode

Switch to select tube emulation or real tube circuit.

Sample Sound Settings

Allround

Sample settings for a versatile sound.

Heavy

Sample settings for a heavy sound.

Funky

Sample settings for a funky sound.

Slap

Sample settings for slap bass playing.

Fretless

Sample settings for fretless bass playing.