To Next PageTo Next Page
Need help?Do you have a question about the Ebyte E32 Series and is the answer not in the manual?
General| Operating Temperature | -40°C to +85°C |
|---|---|
| Interface | UART |
| Air Data Rate | 0.3-19.2kbps |
| Output Power | 30dBm (1W) |
| Communication Distance | 3-8km (depending on environment) |
Covers key electrical performance metrics including current consumption.
Specifies the current draw during wireless transmission for various models.
Specifies the current draw during wireless reception for various models.
Defines the acceptable input voltage range and operational limits for the module.
Details the radio frequency performance characteristics.
Lists the RF output power levels for different module variants.
Specifies the minimum signal strength required for reliable data reception.
Comprehensive explanation of the AUX pin's role in signaling module status.
Guides on how to change the module's operating mode using M1 and M0 pins.
Describes the standard transmitting and receiving functions in Mode 0.
Details Mode 1, including preamble use for waking receivers in power-saving mode.
Explains the energy-efficient mode for monitoring wireless signals with low power consumption.
Focuses on using Mode 3 for module parameter configuration via serial commands.
Lists hexadecimal commands for parameter control, reading, and reset operations.
Detailed guide on using commands to configure various module operational parameters.
Allows adjustment of the RF output power for optimal range and consumption.
A practical, step-by-step tutorial for configuring module parameters using the dedicated software.
Identifies factors that can cause module damage and outlines preventive measures.
