Ebyte E52-400/900NW22S - More Query Commands

Chengdu Ebyte Electronic Technology Co.,Ltd.. E52-400/900NW22S User Manual
CopyriCopyright ©2012–2023, Chengdu Ebyte Electronic Technology Co.,Ltd.
12
6.4 Setting up the instruction set
 Set the command suffix to "=%d,%d,%d", for example, set the module target address command
"AT+DST_ADDR=25640,0", the first parameter is the target address, and the second parameter is whether to save
to Flash , the middle needs to be separated by ",".
 If there is no <save> parameter in the setting command, it will be saved in Flash.
AT+HEAD=?
Query whether the extra
frame header function is
enabled
Returns whether the extra frame header function is
enabled
AT+SECURITY=?
Query whether the data
encryption function is
enabled
Returns whether the data encryption function is
enabled
AT+RESET_AUX=?
Query whether LED2
changes during automatic
reset
Returns whether LED2 changes to turn on when the
radio frequency is restarted.
AT+RESET_TIME=?
Query the automatic reset
time
Returns the radio frequency automatic restart time,
unit min
AT+FILTER_TIME=?
Query broadcast filter
timeout
Returns the broadcast filter timeout
AT+ACK_TIME=?
Query request response
timeout
Return request response timeout
AT+ROUTER_TIME=?
Query routing request
timeout
Returns the routing request timeout
AT+GROUP_ADD=?
Query GROUP
information
Return multicast group address table
AT+GROUP_DEL=?
AT+GROUP_CLR=?
AT+ROUTER_CLR=?
Query routing table
information
Return routing table information
AT+ROUTER_SAVE=?
AT+ROUTER_READ=?
AT+MAC=?
Query MAC unique
address
Returns the MCU's unique 32-bit MAC address
AT+KEY=?
Query encryption key
Unable to read to avoid key leakage