Ebyte E810-DTU User Manual

Chengdu Ebyte Electronic Technology Co,.Ltd E810-DTU User Manual
Copyright ©2012–2020, Chengdu Ebyte Electronic Technology Co,.Ltd
8
4. Software setting
Figure 1 Parameter setting software
3.2 DNS server address
The DNS server is mainly used to convert the domain name into a network-recognizable IP address. DNS server
address can be set, it can implement domain name resolution when the local domain name server is not complete. Users
can also set specific DNS server addresses as required, E810-DTU(RS232)-V2.0 will submit a resolution request to the
configured DNS server when domain name resolution is required, more flexible and reliable.
In static IP mode, the default address of the DNS master server is 61.139.2.69, and the backup DNS server address
is 192.168.4.1. In DHCP mode, the DNS server address is automatically obtained. Domain name server address
supported by the module can be set.
4 Socket characteristics
The Socket operating mode of E810-TTL is divided into TCP Client, TCP Server, UDP Client, and UDP Server., it
can be set with the host computer software, the setting interface is as follows:

Ebyte E810-DTU Specifications

General

Brand	Ebyte
Model	E810-DTU
Category	Server
Language	English