EasyManuals Logo

Ebyte E840-DTU User Manual

Ebyte E840-DTU
33 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
Chengdu Ebyte Electronic Technology Co.,Ltd E840-DTU(4G-02E) User Manual
Copyright ©2012–2019
Chengdu Ebyte Electronic Technology Co.,Ltd
25
Function Set/query the network protocol parameter format.
Format inquire
transmitAT+SOCK3<CR>
return
<CR><LF>+OK=<EN>,<protocol>,<ip>,< port ><CR><LF>
configure
transmit
AT+SOCK3=<EN>,<protocol>,<ip>,< port ><CR>
return<CR><LF>+OK<CR><LF>
Parameter EN enable 0turn off SOCK3
1turn on SOCK3
protocol type
TCPC / UDPC
TCPC corresponding TCP client
UDPC corresponding UDP client
Ip The IP address or domain name of the target server when the module is set to "CLIENT"
Port The port number of the server, in decimal, less than 65535.
AT+REGMOD
Function Set the query registration package mechanism.
Format inquire
transmit
AT+REGMOD<CR>
return
<CR><LF>+OK=<status><CR><LF>
configure
transmitAT+REGMOD =<status><CR>
return<CR><LF>+OK<CR><LF>
Parameterstatusregistration package mechanism.
EMBMAC adds MAC/IMEI as registration packet data before each packet sent to the server.
EMBCSTM adds custom registration package data before each packet is sent to the server.
OLMAC sends a MAC/IMEI registration packet only when it is first linked to the server.
OLCSTM sends a user-defined registration package only the first time it is linked to the server.
OFF Disables the registration of the packet mechanism.
AT+REGINFO
Function Set the contents of the query custom registration package
Format: Query
transmitAT+ REGINFO <CR>
return<CR><LF>+OK=<data><CR><LF>
configure
transmitAT+ REGINFO =<data><CR>
return<CR><LF>+OK<CR><LF>
Parameter
data ASCII in 40 bytes
AT+REGINFONEW
Function
set inquire self-defined registration package content
Format inquire
transmit
AT+ REGINFONEW<CR>
return<CR><LF>+OK=<type>,<data><CR><LF>
configure
transmitAT+ REGINFONEW =<type>,<data><CR>
return<CR><LF>+OK<CR><LF>
Parametertype
0 Registration package type is HEX
1 Registration package type is ASCII code
data
ASCII code within 40 bytes, when the registration packet type is HEX, the content must be in the legal HEX
format and the length must be an even number.
AT+HEARTMOD
Function
set/inquire heartbeat mode
Format inquire
transmitAT+ HEARTMOD<CR>

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ebyte E840-DTU and is the answer not in the manual?

Ebyte E840-DTU Specifications

General IconGeneral
BrandEbyte
ModelE840-DTU
CategoryModem
LanguageEnglish

Related product manuals