Chengdu Ebyte Electronic Technology Co., Ltd. E90-DTU(400SL30P)User manual
Copyright ©2012–2019, Chengdu Ebyte Electronic Technology Co., Ltd
Three main configuration function descriptions
See Figure 1 below to configure the radio's own operating parameters
See Figure 2 below. It is used to remotely configure or read the parameters of
other radio stations or E22 modules. The configured radio stations or modules
are required to be in transparent transmission mode and enabled by wireless
configuration. Consistent with own station. Immediately after configuration
Note: During remote configuration, if the airspeed is set to 0.3K, the reading
and writing speed will be slightly slower, please be patient
To Next Page
Loading...
