EC Line EC-VP-1100 User Manual

EC-VP-1100 User Manual – V1 - 9 -
5. Getting Start:
This chapter describe preparation before use the EC-VP-1100. The following topics are described.
5.1 Unpacking
Below are the items should include in the carton box:
 EC-VP-1100 X 1
 Power Supply X 1
 Power cord X 1
 Quick Installation Guide X 1
 Warranty sheet X 1
 Drivers CD X 1
If any of the above item is missing, please contact you dealer.
After unpacking the carton, connect the power cord and Ethernet extension cable properly to the system.
Cables should pass through the punch hole to the rear bottom of the stand.
Optional Parts
1. MSR
2. Customer Display
3. Second Display with stand
4. Screws
5.2 Remove the Rear Cover
Steps to remove the rear cover
1. Remove all screws (including the hard disk cover)
2. Remove the cover

EC Line EC-VP-1100 Specifications

General

Brand	EC Line
Model	EC-VP-1100
Category	Touch terminals
Language	English