EC-VP-1100 User Manual – V1 - 3 -

Overview

Thank you for purchasing the EC-VP-1100 all in one touch POS terminal. We are committed to use up-to-date

technology and provide better after-sales service continuously. Please take time to read this user manual

before system installation.

Note: Information in this user manual may change without prior notice

1. Safety Information

 Make sure the power voltage are correct and the ground connection of the power outlet is working properly

before plug in the electricity.

 During lightning storm, unplug the network cable, power cable and any other connections.

 Turn off power before connect any devices (except USB devices) to the terminal.

 Do not attempt to open the chassis. There is a possibility of electric shock. For service, contact the

authorized service provider.

 Do not spill liquid on the terminal or place any objects into the ventilation holes. It may cause short-circuit

for the internal components and cause a fire or electric shock.

 After the computer is stored below temperature of 10 degree, put the machine at room temperature (10 –

35 degree) in the original packing for not less than two hours to resume to room temperature before

operation. This is to avoid condensation that might bring electrical damage.

 Keep the terminal clean, dry, away from dust, moisture and direct sunlight.

 Do not use harsh chemicals or strong cleaning solvents to clean the LCD or touch panel. Use a soft terry

cloth with mild cleaning liquid.

 Do not share the same power outlet with high power electrical appliances, keep distance from high level

magnetic interference.

 Do not use sharp pointed objects to operate, it will cause damage to the screen.

When the following occurs:

 Water go in the POS terminal;

 Physical damage accidentally;

 Burning smell from the terminal; disconnect the power supply immediately, unplug the power cord and

contact a qualified service technician.

EC Line EC-VP-1100 User Manual

Other manuals for EC Line EC-VP-1100