HYDRA-DS NO
3
-N Page 39
7.2 INSTALLATION
7.2.1 MOUNTING
Mount the T80 in a location where there is easy access to the analyzer and sensors. Install the system in an area where
vibrations, electromagnetic and radio frequency interference are minimized or absent. Do not mount in direct sunlight
or areas of extreme heat (temperature > 120°F). The IP65 T80 is suitable for outdoor use but it is best to mount it with
a protective cover or sunshield to prevent discoloring over the years.
Universal Mounting Brackets
To Next Page
Loading...
Need help?
General
