INSTRUCTION MANUAL
9
TREADMILL ASSEMBLY
Lift up the handlebar and push the #A3L/A3R Left/Right upright
forward until you hear a “click” sound indicating
it is locked into position.
2
STEP
Remove equipment and screen from box.
Place it flat on the floor.
Note: Do not roll the treadmill out of the box with the
plastic wrap around the transport wheels, doing so
could cause the plastic to bunch up in the wheels and
make it hard to move.
1
STEP
Assembly should take place on a soft
surface, such as a carpet or rug, or
with the cardboard box opened to
protect the floor.
Lift #A4 and push it downward until there is an
audible “click” sound indicating the handlebar
is locked into position.
Rotate the #B1 console and angle forward based
on preference for use.
Note: The console is adjusted with a self locking system, (with the
treadmill off) use both hands on each side of the console when
adjusting and firmly push forwards or pull backwards to adjust.
3
STEP
Time/Calories
Speed Quick
Adjustment
To Next Page
Loading...
