EasyManua.ls Logo

Echelon STRIDE-RCX - Use Guide

Echelon STRIDE-RCX
34 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
uncontrolled environment. This equipment should be installed and operated with a min-
imum distance of 20cm between the radiator and your body.
This transmitter must not be co-located or operating in conjunction with any other an-
tenna or transmitter.
USE GUIDE
Always connect the appliance to a socket with a grounded circuit and no other ap-
pliances connected to it. It is recommended not to use any extension cords.
Ensure the treadmill stable on the ground before use.
Check if its function normal or not before running.
Stand on two side rails when the treadmill starts.
Attach the safety key to your clothes when running to control any emergency.
Press “start” button to get the treadmill started.
Follow the running belt with left leg to do pre-running. Only when you feel it right,
then to run with two legs on the treadmill with proper running posture.
ONLY FOR ONE PERSON. Overload not allowed.
Adjust speed if necessary.
After running, pull out the safety key or press “stop” button to get it stopped.
After running, remember to turn off the power and pull out the plug.
When you are running on the treadmill, if you feel discomfortable, please stop to run
immediately and consult doctors.
When you are assembling or running the machine, please ensure no person or pets
around it.
GROUNDING INSTRUCTIONS
This product must be grounded. If it should malfunction or breakdown, grounding
provides a path of least resistance for electric current to reduce the risk of electric
shock. This product is equipped with a cord having an equipment-grounding con-
ductor and a grounding plug. The plug must be plugged into an appropriate outlet

Related product manuals