Trimmer ATTAchmenT
OperATOr's mAnuAl
13
I
G
G
FF
B
B
H
E
B
3. Hold the spool, opening toward you. Place index nger between
the two strands and wind line, tightly and evenly, in direction of
arrow (E).
4. Place ends of line (C) into notches (F) in spool, leaving 6 in. pro-
truding.
5. Feed ends of line outward through eyelets (G) in drum.
6. Align grooves in spool with pegs (I), and push spool (B), into
drum.
7. Hold spool and drum securely with one hand, and pull each line to
disengage from notches.
8. Hold drum (A) and turn spool (B) counter clockwise until peg
clicks into hole.
9. Trim lines to 8 in. length.
To Next Page
Loading...
