Echo BRD-2620 User Manual

ASSEMBLY BRD-2620
16 X7502343001
© 09/2019 ECHO Inc.
ASSEMBLY
Support Handle
1. If necessary, position support
handle for comfortable
operation and securely tighten
screws.
Note: Label shows minimum
spacing for support
handle location.
Edger Blade Installation
1. Remove bed redefining blade
as shown in “Blade
Replacement” Section. Discard
used split pin.
2. Do not remove inner blade
adapter (A) or locking tool (B)
(not provided).
3. Install and center edger blade
(C) on inner adapter.
4. Install outer adapter (D) and nut
(E).
5. Tighten nut (E) firmly,
counterclockwise.
6. Remove locking tool (B).
7. Install new split pin (F) to
secure nut (E).
A
B
C
D
E
B
F

Echo BRD-2620 Specifications

General

Brand	Echo
Model	BRD-2620
Category	Power Tool
Language	English