Echo CS-360T

2
EMISSION ADJUSTMENT GUIDE ............... 7
2
-1 General adjusting rules .............................. 7
2
-2 Presetting idle adjust screw, L mixture
needle
and
H mixture needle ........................................ 7
2
-3 Adjusting carburetor ................................... 8
00-33A-01
CS-330T, CS-360T
1
0
INTRODUCTION
CONTENTS
page
We are constantly working on technical
improvement of our products. For this reason,
technical data, equipment and design are
subject to change without notice. All
specifications, illustrations and directions in
this SERVICE DATA are based on the latest
products information available at the time of
publication.
1 SERVICE INFORMATION ............................. 2
1-1 Specification ............................................... 2
1-2 Technical data ............................................ 3
1-3 Torque limits ............................................... 4
1-4 Special repairing materials ......................... 4
1-5 Service limits .............................................. 5
1-6 Service tool ................................................. 6
Reference No. 00-33A-01
ISSUED: 200603