CS-7310P OPERATION
X7503340002 33
© 11/21 ECHO Incorporated
4. Press the decompression
device (B).
5. Securely hold the chainsaw as
shown and pull starter handle.
6. Choke may be used if
necessary, but after first starting
sound, squeeze throttle trigger
to release choke and return
engine to idle.
Note: If engine does not start
after 5 pulls, use cold
start procedure.
Do not increase engine speed while chain brake is locked. Severe
brake damage will result.
Running
The saw chain should not move at idle, otherwise serious
personal injury can result.
Note: If saw chain moves adjust carburetor according to
“Carburetor Adjustment” instructions in this manual, or see
your dealer.
1. After engine starts, allow it to return to idle and warm up before using.
To Next Page
Loading...
Need help?
General
