21
CS-8000 TYPE1-E
CHAIN AND GUIDE BAR COMBINATION
The following combinations are recommended for model CS-8000 TYPE1-E.
@ Standard configuration
Guide Bar Saw chain
Length ECHO Part No. Pitch Type Links
mm (in) Double Guard Symmetrical mm (in) OREGON
508 (20) 20D0PD3870 20D0PS3870 9.53 (3/8) 72LP, 72LGX 70
610 (24) 24D0PD3881 24D0PS3881 9.53 (3/8) 72LP, 72LGX 81
@ 686 (27) —————— 27D0PS3893 9.53 (3/8) 72LP, 72LGX 93
813 (32) —————— 32D0PS3805 9.53 (3/8) 72LP, 72LGX 105
914 (36) —————— 36D0PS3816 9.53 (3/8) 72LP, 72LGX 116
GUIDE BAR
Replacement guide bars.
The following guide bars may be considered to
have equivalent kickback energy.
• Sprocket nose guide bars of the same length
and nose radius, same pitch and having the
same number of teeth.
• Hard nose guide bars of the same length and
nose radius as a sprocket nose bar.
SAW CHAIN
CAUTION
Do not use replacement saw chain unless it
has been designated as meeting the CSA Z
62.3 kickback performance requirements.
NOTE
LOW KICKBACK SAW CHAIN meets the
kickback performance requirements of CSA Z
62.3 (safety requirements for gasoline-powered
chain saws).
To Next Page
Loading...
