EasyManua.ls Logo

Echo CS-800P - User Manual

Echo CS-800P
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
INSTRUCTION MANUAL
CHAIN SAW
CS-800P
WARNING
Read the instructions carefully and follow the rules for safe
operation.
Failure to do so could result in serious injury.
X750-023 86 0
X750 315-230 0
ECHO, INCORPORATED
400 Oakwood Road, Lake Zurich, Illinois 60047-1564
Phone : 847-540-8400
Printed in Japan 1402m 1137 ES

Table of Contents

Other manuals for Echo CS-800P

Preview: Operator's Manual
Operator's Manual36 pages

Questions and Answers

  • B
    brojasJul 26, 2025
    Why does my Echo CS-800P Chainsaw engine crank but not start?
    • J
      Jorge BarajasJul 27, 2025
      If your Echo Chainsaw engine cranks but doesn't start, several issues could be at play. There might be no fuel reaching the carburetor, in which case you should clean or replace the necessary parts. Alternatively, the fuel mixture could be too rich; try opening the choke, cleaning or replacing the air filter, or adjusting the carburetor. Another possibility is that there's no spark at the end of the plug wire, ensure the switch is on. Finally, check for spark at the plug; adjust the gap to 0.6 to 0.7 mm, clean or replace the plug.
  • C
    Christopher LambAug 3, 2025
    What to do if my Echo CS-800P engine runs but dies or accelerates poorly?
    • L
      laura39Aug 3, 2025
      If your Echo Chainsaw engine runs but dies or accelerates poorly, several factors could be responsible. A dirty air filter, fuel filter, or a blocked fuel vent could be the cause; try cleaning or replacing these components. Also, the spark plug may need cleaning, adjustment, or replacement. The carburetor might need adjustment, or the cooling system or exhaust port/spark arrestor screen might be blocked and in need of cleaning.
  • Q
    qmercerAug 10, 2025
    What to do if Echo Chainsaw engine does not crank?
    • A
      Alicia GatesAug 11, 2025
      If the engine of your Echo Chainsaw does not crank, this could indicate an internal engine problem. In this case, it is recommended to ask your ECHO dealer for assistance.
  • T
    Tyler HicksAug 17, 2025
    What to do if the muffler of my Echo CS-800P is wet with fuel?
    • N
      nicolejonesAug 17, 2025
      If the muffler of your Echo Chainsaw is wet with fuel, the fuel mixture is likely too rich. To resolve this, open the choke, replace the air filter, and adjust the carburetor, or ask your dealer.

Summary

Rules For Safe Operation

Kickback Safety Precautions for Chain Saw Users

Detailed precautions to prevent kickback injuries from chain saw operation.

Other Safety Precautions

Essential safety measures for operating a chain saw safely, covering various scenarios.

Symbols and Signs

Nomenclature of Parts

Operator Safety

Personal Protective Equipment (PPE)

Correct Use of Chain Brake

Kickback Safety and Chain Brake Function

Explains kickback hazards and the role of the chain brake in preventing injuries.

Preparation for Use

Guide Bar and Saw Chain Installation;Removal

Adjusting Chain Tension

Instructions on how to properly tension the saw chain for safe and effective cutting.

Fuel and Lubricant

Fuel Statement and Mixing Ratio

Details on approved gasoline, oil, and the correct fuel mixture ratio for the engine.

Handling Fuel Safely

Safety guidelines for mixing, handling, and storing fuel to prevent hazards.

Operation

Chain Lubrication

Engine Starting Procedures

Step-by-step procedures for starting the chain saw engine when cold or warm.

Running and Stopping the Saw

Chain Tension and Lubrication Checks

Cutting Instruction

General Cutting Safety and Techniques

Felling the Tree

Detailed instructions and safety precautions for felling trees correctly.

Chain Brake Operation

Chain Brake Operation and Testing

Maintenance and Care

Maintenance Intervals and Skill Levels

Component Maintenance Procedures

Carburetor Adjustment

Adjusting Carburetor Settings

Instructions for adjusting the carburetor for optimal engine performance and emissions.

Troubleshooting

Engine Starting and Running Problems

Guide to diagnosing and resolving common engine starting and running issues.

Echo CS-800P Specifications

General IconGeneral
Engine Type2-stroke
Engine Displacement80.7 cc
Power Output4.63 kW
Fuel Capacity0.825 liters
Oil Capacity0.4 liters
Chain Gauge0.050 inch
Weight (Powerhead Only)7.6 kg
Displacement80.7 cc
Weight (without bar and chain)7.6 kg
Bar Length20 inches
Chain Pitch0.375 inches
Bar Length Options20 inches
Starting SystemRecoil
Oil Tank Capacity0.40 l
Guide Bar Length20 inches
Weight7.6 kg (without bar and chain)

Related product manuals