Echo CS-800P User Manual (English)

Other manuals for Echo CS-800P

Questions and Answers:

B
brojasJul 26, 2025
Why does my Echo CS-800P Chainsaw engine crank but not start?
- J
  Jorge BarajasJul 27, 2025
  If your Echo Chainsaw engine cranks but doesn't start, several issues could be at play. There might be no fuel reaching the carburetor, in which case you should clean or replace the necessary parts. Alternatively, the fuel mixture could be too rich; try opening the choke, cleaning or replacing the air filter, or adjusting the carburetor. Another possibility is that there's no spark at the end of the plug wire, ensure the switch is on. Finally, check for spark at the plug; adjust the gap to 0.6 to 0.7 mm, clean or replace the plug.
C
Christopher LambAug 3, 2025
What to do if my Echo CS-800P engine runs but dies or accelerates poorly?
- L
  laura39Aug 3, 2025
  If your Echo Chainsaw engine runs but dies or accelerates poorly, several factors could be responsible. A dirty air filter, fuel filter, or a blocked fuel vent could be the cause; try cleaning or replacing these components. Also, the spark plug may need cleaning, adjustment, or replacement. The carburetor might need adjustment, or the cooling system or exhaust port/spark arrestor screen might be blocked and in need of cleaning.
Q
qmercerAug 10, 2025
What to do if Echo Chainsaw engine does not crank?
- A
  Alicia GatesAug 11, 2025
  If the engine of your Echo Chainsaw does not crank, this could indicate an internal engine problem. In this case, it is recommended to ask your ECHO dealer for assistance.
T
Tyler HicksAug 17, 2025
What to do if the muffler of my Echo CS-800P is wet with fuel?
- N
  nicolejonesAug 17, 2025
  If the muffler of your Echo Chainsaw is wet with fuel, the fuel mixture is likely too rich. To resolve this, open the choke, replace the air filter, and adjust the carburetor, or ask your dealer.

Echo CS-800P Specifications

General

Engine Type	2-stroke
Engine Displacement	80.7 cc
Power Output	4.63 kW
Fuel Capacity	0.825 liters
Oil Capacity	0.4 liters
Chain Gauge	0.050 inch
Weight (Powerhead Only)	7.6 kg
Displacement	80.7 cc
Weight (without bar and chain)	7.6 kg
Bar Length	20 inches
Chain Pitch	0.375 inches
Bar Length Options	20 inches
Starting System	Recoil
Oil Tank Capacity	0.40 l
Guide Bar Length	20 inches
Weight	7.6 kg (without bar and chain)