Echo CS-800P User Manual

15
CS-800P
WHEN THE ENGINE IS COLD
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
s -OVECHAINBRAKELEVERFULLYFORWARDTOLOCK
chain brake before starting.
s &ILLTHEFUELTANKWITHFUELMIXTURE
It is not permitted to fill fuel above the shoulder
level of fuel tank.
s &ILLTHECHAINOILTANKWITHLUBRICANT
Do not over fill.
s -OVEIGNITIONSWITCHTOhRun” position.
s 0ULLCHOKECONTROLKNOBALLTHEWAYOUT
(Choke position
)
s 3ECURELYHOLDTHECHAINSAWASSHOWNAND
pull starter handle several times until first firing
sound.
s 0USHCHOKECONTROLKNOBALLTHEWAYIN
s 0ULLSTARTERHANDLEAGAINTOSTARTTHEENGINE
s 7HENENGINESTARTSIMMEDIATELYSQUEEZEAND
release throttle trigger for disengaging throttle
latch and returning engine to idle, and pull front
hand guard towards the operator immediately.
(Chain brake unlocked position)
WHEN THE ENGINE IS WARM
CAUTION
Make sure the bar and chain are free from
any obstruction when starting the chain saw.
s -OVECHAINBRAKELEVERFULLYFORWARDTOLOCK
chain brake before starting.
s #ONlRMTHEREISFUELANDCHAINOILINTHETANKS
s -OVEIGNITIONSWITCHTOhRun” position.
s 3ECURELYHOLDTHECHAINSAWASSHOWNANDPULL
starter handle.
s #HOKEMAYBEUSEDIFNECESSARYBUTAFTERlRST
firing sound, pull throttle trigger to release choke.
s !FTERSTARTINGTHEENGINEPULLFRONTHANDGUARD
towards the operator immediately.
(Chain brake unlocked position)
Unlock chain brake
Choke control knob
Choke open
Unlock chain brake
Starter handle
Start / Run
Ignition switch
Chain brake
Choke control knob
Choke
Chain brake

Echo CS-800P Specifications

General

Brand	Echo
Model	CS-800P
Category	Chainsaw
Language	English