Echo CS-800P User Manual

14
CS-800P
Oil tank cap
CHAIN LUBRICANT
Proper lubrication of the chain while in operation
reduces the friction between the chain and the
guide bar to a minimum and assures a longer
service life.
s 5SEBARANDCHAINOILOFHIGHQUALITYFORTHIS
purpose.
s $ONOTUSEUSEDORRECLAIMEDOILTOAVOIDVARIOUS
oiler problems.
s 5SE%#(/BARANDCHAINOIL
s 7HEN%#(/BARANDCHAINOILISNOTAVAILABLE
Use motor oil, etc.
s 5SEBARANDCHAINOILOFTHEFOLLOWINGGRADES
SAE No. 30 ....... in summer
SAE No. 10 ....... in winter or when cutting
resinous trees
s 7HENREFUELINGALSORElLLCHAINOIL
OPERATION
Start / Run
Ignition switch
Chain brake
Starter handle
Unlock chain brake
Choke control knob
Fuel tank cap
Cap indication
Oil/fuel tanks are indicated by the following
illustrations on the caps.
Choke
WARNING
• After choke control knob is pulled and then
knob is returned to original position, throttle
remains a little open (latch condition).
• If engine is started in this latch condition,
chain starts to turn. Do not start engine
before chain brake is activated.
CAUTION
• After starting the engine, immediately
squeeze and release throttle trigger for
disengaging throttle latch and returning
engine to idle, and pull front hand guard
towards the operator immediately.
(Chain brake unlocked position)
• Never use throttle latch for cutting.
• Use the chain brake only in starting or in
emergencies.

Echo CS-800P Specifications

General

Brand	Echo
Model	CS-800P
Category	Chainsaw
Language	English