10
CSG-7410
Spectators children and fellow workers must be
warned to come no nearer than 9 m (30 feet) while
the saw is in use. Shut off the saw immediately if
some one moves closer to you than 9 m (30 feet).
Persons working in the area near you should wear
the same protective equipment as the saw operator
if endangered by risky flying debris.
OPERATOR SAFETY
Protective Equipment
WARNING
Engine cut-off saw users risk injury if the
saw is used improperly, and / or safety pre-
cautions are not followed. Protective clothing
and safety gear must be worn when operat-
ing a engine cut-off saw.
You must wear eye protection goggles qualified
to the CE mark or the latest ANSI Standard Z 87.
(Z 87 is stamped on the goggles). These goggles
also must be worn under a face screen if one is
used. A face screen should be worn when there
is a risk from flying debris.
Hearing protection should be worn. (See
“DANGER,” page 23)
Wear a respirator or dust mask (APF10) when
cutting concrete, stone, brick or other materials
where fine dust is produced while cutting. Use
water flush to keep down the dust.
Clothing should be made from fabric containing
natural fibres that resist catching fire and do not
melt. The clothing should cover as much skin
area as possible. Clothing should offer freedom
of movement, but should not be too loose or
baggy. Do not wear ties or jewellery.
Wear heavy duty boots with non-slip soles. The
boots should be high enough for shin protection,
or you should wear chaps for shin protection.
Wear non-slip, heavy duty work gloves to
improve your grip on the saw handles. The
gloves also help to reduce the transmission of
machine vibrations to your hands.
Hard Hat
No Bystanders!
Hearing Protection
Goggles (Z 87)
Dust Mask or Respirator
Trim-Fitting
Protective Clothing
Heavy Duty non-Slip Gloves
Chaps or High Boots
for Spark Protection
Heavy Duty Boots
with non-Slip Soles
Protecting Others
To Next Page
Loading...
Need help?
General
