DCS-5000
9992220570826
© 08/2021 ECHO Incorporated
OPERATION
Checking Chain Tension
Chain Lubrication Test
Do not operate with a loose chain. Serious injury can occur.
Chain tension should be checked
frequently during work and corrected as
necessary.
Tension the chain as tight as possible,
but so it can still be pulled easily along
the guide bar by hand.
Hold the chainsaw just above a dry
surface and depress trigger switch to
half speed for 30 seconds.
A thin line of "thrown" oil should be seen
on the dry surface.
Cutting Instructions
General
◆
This chainsaw is designed for cutting wood. Do not cut
metal, plastic or any non-wood material.
◆
Wear suitable hearing
protection such as earmuffs
or earplugs to protect
against objectionable or
uncomfortable loud noises.
To Next Page
Loading...
Need help?
General