ES-250 OPERATION
X7501182906 27
© 9/2018 ECHO Inc.
Stopping Engine
1. Throttle Trigger/Throttle
Position Lever
Release throttle trigger (F).
Move throttle position lever
(B) forward to idle position
and allow engine to return to
idle before shutting off
engine.
2. Stop Switch
Move stop switch (A) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your ECHO dealer repair stop switch before using unit
again.
Operating Blower
Always wear safety glasses, hearing protection and a face filter
mask or serious personal injury may result. Do not point the
blower pipe in the direction of people or pets.
To Next Page
Loading...
