10
SPECIFICATIONS
MODEL ------------------------------------- GT-200
Length------------------------------------------------- 1,410 mm ( 55.5 in.)
Width-------------------------------------------------- 310 mm (12.2 in.)
Height ------------------------------------------------- 385 mm (15.2 in.)
Weight (dry) w/Cutter Head ------------------------ 4.35 kg (9.6 lb.)
Engine Type ------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore ---------------------------------------------------- 32.2 mm (1.29 in.)
Stroke-------------------------------------------------- 26.0 mm (1.02 in.)
Displacement ----------------------------------------- 21.2 cc (1.29 cu. in.)
Exhaust System -------------------------------------- Spark Arrestor Muffler
Carburetor -------------------------------------------- Zama diaphragm model w/primer
Ignition System -------------------------------------- Flywheel magneto, capacitor discharge
Spark Plug -------------------------------------------- NGK BPM-8Y Gap 0.65 mm (0.026 in.)
Fuel ---------------------------------------------------- Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------- 89 Octane unleaded. DO NOT use fuel containing methyl alcohol, more
than 10% ethyl alcohol or 15% MTBE.
Oil ------------------------------------------------------ Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------- 0.45 lit. (15.2 US fl. oz.)
Starter System ---------------------------------------- Automatic rewind starter with power spring assist
Clutch ------------------------------------------------- Centrifugal Type
Drive Shaft -------------------------------------------- 6.35 mm (1/4 in.) Flex Shaft
Rotating Direction ----------------------------------- Clockwise viewed from top
Cutter Head ------------------------------------------- Nylon line head (2-line) with .080 Line capacity 203 mm (8 in.)
Handle ------------------------------------------------- Left - D-Loop, Right - Grip
Shoulder Harness ------------------------------------ Optional P/N 99944200201
Idle Speed (RPM) ------------------------------------ 2,400 - 3,200
Wide Open Throttle Speed (W.O.T.)
with Nylon Line Head (RPM) ----------------------- 6,800 - 7,800
To Next Page
Loading...
