Echo GT-201 User Manual

Grass Trimmer
Operator's Manual
MODELS GT-201
Serial Number 002001001 & Up
WARNING DANGER
X7702272300
X770000170
06/00
WARNING
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.
Read rules for safe operation and instructions carefully. ECHO provides an Operator's
Manual and a Safety Manual. Both must be read and understood for proper and safe
operation.

Echo GT-201 Specifications

General

Brand	Echo
Model	GT-201
Category	Trimmer
Language	English

Summary

Introduction to ECHO Grass Trimmer

Manual Safety Symbols and Information

Safety Decals Overview

Details safety decals found on the unit for proper understanding and operation.

International Symbols Guide

Equipment Pre-Operation Check

Fuel Handling and Safety

Fuel Requirements and Mixing

Details correct gasoline octane, two-stroke oil type, and mixing ratios.

Safe Fuel Handling

Provides essential safety warnings for mixing, storing, and handling flammable fuel.

Post-Refueling and Storage

Instructions for after refueling, unit use, and safe fuel storage.

Personal Condition and Safety Equipment

Physical Condition Assessment

Assesses operator's physical and mental state for safe operation.

Eye Protection Requirements

Specifies required eye protection meeting ANSI Z87.1 or CE standards.

Hand Protection Recommendations

Recommends heavy-duty work gloves for grip and vibration reduction.

Hearing Protection Advice

Advises wearing hearing protection when operating the unit.

Proper Clothing Guidelines

Details recommended clothing for safe operation, including fit and material.

Hot Humid Weather Precautions

Addresses increased fatigue risk in hot weather and suggests scheduling adjustments.

Safe Operation Guidelines

Operation Area Preparation

Guidance on assessing the work area for hazards and ensuring safety zones.

Operator and Bystander Safety

Ensures operators and others in the safety zone are equipped with protective gear.

Hot Surfaces and Debris Management

Warns about hot components and keeping exhaust areas clear of flammable debris.

Grip and Stance for Control

Instructs on maintaining a firm grip and solid stance for safe operation.

Extended Operation and Extreme Conditions

Vibration and Cold Exposure Risks

Discusses Raynaud's Phenomenon risk from vibration/cold and preventative measures.

Repetitive Stress Injury Prevention

Addresses risks of RSI/CTS and provides guidelines for prevention and early detection.

Product Description and Contents

Product Description Details

Details factory pre-assembly and checks required after unpacking.

Included Package Contents

Lists all items included in the package, such as manuals and unit parts.

Emission Control Information

California Emission Standards

Explains emission control system and California regulations for the engine.

Air Index Tag Explanation

Details the Air Index Tag comparing emissions to California Air Resources Board standards.

Product Emission Durability

Defines the 300-hour emission durability period and maintenance requirements.

Component Identification and Description

Operator's and Safety Manuals

Details the included Operator's and Safety Manuals and their purpose.

Power Head and Drive Shaft Assembly

Describes the power head, engine, clutch, and drive shaft assembly components.

Cutting Head and Shields

Explains the nylon cutter head, debris shield, and cut-off knife functions.

Controls and Handles

Details the throttle trigger, stop switch, grip, and handles for operation.

Muffler and Fuel System Components

Describes the muffler, spark arrestor, fuel tank, cap, and primer bulb.

Air Cleaner, Choke, and Spark Plug

Explains the air cleaner, choke lever, and spark plug functions.

Safety Video Information

Provides information about an optional safety video for training.

Technical Specifications

Assembly Instructions

Plastic Shield Installation

Instructions for installing the plastic debris shield assembly.

Nylon Line Head Attachment

Steps for attaching the nylon trimmer head to the drive shaft.

Front (Loop) Handle Adjustment

Guidance on repositioning and tightening the front loop handle for comfort.

Pre-Operation Fuel Requirements

Fuel Requirements and Mixing

Details correct gasoline octane, two-stroke oil type, and mixing ratios.

Safe Fuel Handling

Provides essential safety warnings for mixing, storing, and handling flammable fuel.

Pre-Operation Checks and Storage

Post-Refueling and Unit Storage

Instructions for after refueling, unit use, and safe fuel storage.

Equipment Check Before Operation

Lists essential checks for nuts, bolts, fuel lines, shield, and cutting attachment.

Starting Cold Engine

Starting Warm Engine

Stopping the Engine

Maintenance Overview

Maintenance Skill Levels

Categorizes maintenance tasks by difficulty level, from easy to experienced.

Maintenance Schedule

Air Filter Maintenance

Fuel Filter Replacement

Spark Plug Maintenance

Cooling System Cleaning

Engine Cover Removal Procedure

Steps for removing the engine cover as part of cooling system cleaning.

Exhaust System Maintenance

Spark Arrestor Screen Cleaning

Procedure for cleaning the spark arrestor screen in the muffler.

Carburetor Adjustment

Engine Break-In and High Altitude

Notes on engine break-in duration and high altitude adjustment requirements.

High Speed and Idle Speed Adjustment

Detailed steps for adjusting carburetor high speed and idle settings.

Lubrication Procedure

Nylon Line Replacement

Troubleshooting Guide

Storage and Long-Term Maintenance

Servicing Information and Support

Genuine Parts and Service

Information on obtaining genuine ECHO parts and authorized service.

Consumer Support and Warranty

Contact details for consumer support and warranty registration.

Manuals and Additional Resources

Guidance on acquiring replacement manuals and safety videos.

Ordering Operator's Manuals

Instructions and cost for ordering operator's and parts manuals.