16
4.5 m (15 ft.)
C
B
COLD
START
RUN
IDLE
H L
OPERATION
• Provide all users of this equipment with the Operator's Manual and
instructions for Safe Operation.
• Before starting the unit, equip yourself and any other person working
within the 4.5 m (15 ft.) Safety Zone with the required Protective
Equipment and clothing.
• During operation, the complete unit, especially the gear box may
become very hot, too hot to touch. Avoid contact during and
immediately after operation.
• Do not operate this product indoors or in inadequately ventilated
areas.
STARTING COLD ENGINE
1. STOP SWITCH - START/RUN.
Move stop switch (A) away from the STOP position.
2. CHOKE - COLD START.
Move choke (B) to the Cold Start (CLOSED) position.
3. PRIMER - PUMP BULB.
Pump primer bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.
A
A
To Next Page
Loading...
Need help?
General
