7
DESCRIPTION
12. Silencer cover
13. Frame
14. Fuel tank - Contains fuel and fuel filter.
15. Rotation lock button - A button to lock the rotation
of the rear handle.
16. Ignition switch - Device for allowing the engine to
be started and stopped.
17. Fuel tank cap - For closing the fuel tank.
18. Starter handle - Pull handle to start the engine.
(“ES” START)
19. Blade cover
20. Operator’s manual - Included with unit. Read
before operation and keep for future reference to
learn proper, safe operating techniques.
21. Tools - 10 x 19 mm T-wrench (combination
screwdriver/spark plug socket), 8 x 10 mm open
end wrench.
1. Safety decal - Part number X505-002030
2. Front handle - Handle located on the frame.
3. Throttle trigger lockout - Device that prevents the
accidental operation of the throttle trigger until
manually released.
4. Rear handle - Handle located furthest from the
cutting device.
5. Throttle trigger - Device activated by the
operator’s finger, for controlling the engine speed.
6. Air cleaner cover - Covers air filter.
7. Gear housing
8. Spark plug
9. Guard - Guard between the front handle and
cutting device for protecting the hand from injuries
if the hand slips off the handle.
10. Blunt extension - An extending blunt part of the
cutting device. (Applicable to double edged blade
unit)
11. Cutting device - That part of the assembly
of cutter blade and shear plate together with any
supporting part, which performs the cutting action.
2
3
4
5
6
12
11
16
15
13
14
17
18
19
8
10
9
20
21
(X505-002030)
1
7
To Next Page
Loading...
