SPECIFICATIONS PAS-225/SB/VP/VPB
58 X7732274006
© 09/21 ECHO Incorporated
Oil
ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345- FD
,
two-stroke, air-cooled engine oil.
Fuel Tank Capacity 420 mL (14.2 US fl. oz.)
Starter System Automatic Rewind Starter
Clutch Centrifugal Type
Drive Shaft 6.35 mm (0.25 in.) flexible shaft
Handles Front - Support, Rear Handle (with rubber)
Idle Speed 3,000 RPM
Clutch Engagement Speed 4,300RPM
MODEL PAS-225 SB
Length 1798 mm (70.7 in.)
Width 246 mm (9.7 in.)
Height 328 mm (12.9 in.)
Weight (dry) 5.4 kg (11.9 lb.)
Engine Type Air cooled, two-stroke, single cylinder gasoline engine
Bore 32.2 mm (1.27 in.)
Stroke 26.0 mm (1.02 in.)
Displacement
21.2 cc (1.29 in.
3
)
Exhaust
Spark arrestor muffler or spark arrestor muffler with
catalyst
Carburetor Diaphragm with purge pump
Ignition System Flywheel magneto, capacitor discharge ignition type
Spark Plug
NGK BPM-8Y (BPMR-8Y in Canada)
Gap 0.65 mm (0.026 in.)
Fuel Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio 50:1
Gasoline
Use 89 Octane unleaded. Do not use fuel containing
methyl alcohol, more than 10% ethyl alcohol or 15%
MTBE. Do not use alternative fuels such as E-15 or
E-85.
Oil
ISO-L-EGD (ISO/CD 13738) and J.A.S.O. M345- FD
,
two-stroke, air-cooled engine oil.
Fuel Tank Capacity 420 mL (14.2 US fl. oz.)
Starter System Automatic Rewind Starter
Clutch Centrifugal Type
Drive Shaft (upper & lower) 6.35 mm (0.25 in.) flexible shaft
Rotating Direction Counterclockwise; viewed from top
Trimmer Attachment
Speed Feed
®
Nylon line head, Line capacity 6.0 m
(20 ft.)
Handles Front - Support, Rear Handle (with rubber)
MODEL PAS-225
To Next Page
Loading...
