20
FUEL FILTER
Level 1.
Tools required: Fuel line hook. 203-254 mm length of wire with one end
bent into a hook. Clean cloth, funnel, and an approved fuel container.
Parts required: 90008 REPOWER AIR & FUEL FILTER KIT
NOTE
Check fuel filter periodically.
IMPORTANT
Keep fuel tank clean - do not allow dirt or debris to enter fuel
tank.
NOTE
A clogged fuel filter will cause hard starting or poor engine
performance.
1. Pick up the fuel filter through fuel tank opening with a piece of
steel wire.
2. Remove old filter.
3. Install new filter.
VACUUM BAG (OPTIONAL)
Shake dust from bag and inspect for holes or tears.
Inspect zipper and clean debris from teeth to assure complete closing
of zipper.
STARTER ROPE REPLACEMENT
Level 3.
Tools required: SAFETY GOGGLES, Screwdriver, 3mm Allen wrench.
Parts Required: 890 mm ECHO Starter Rope, Lithium based grease.
To Next Page
Loading...
Need help?
General