EasyManua.ls Logo

Echo PB-600 - User Manual

Echo PB-600
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
POWER BLOWER
Operator's Manual
MODELS: PB-600
Serial Number 001001 & Up
PB-601
Serial Number 001001 & Up
WARNING DANGER
Read rules for safe operation and all instructions carefully. ECHO provides this Operator's Manual which
must be read and understood for proper and safe operation.
X750000951
05/00
X7501125401
WARNING
The engine exhaust from this
product contains chemicals known
to the State of California to cause
cancer, birth defects or other
reproductive harm.

Questions and Answers

  • K
    khuntAug 10, 2025
    What to do if there is no spark at the Echo PB-600 plug?
    • E
      ejonesAug 10, 2025
      If there's no spark at the plug in your Echo Blower, try adjusting the gap to 0.65mm (0.026in.). If the spark plug is covered with carbon or fouled with fuel, clean or replace it. If the spark plug is defective, replace it.
  • A
    Amanda CookAug 15, 2025
    What to do if Echo PB-600 Blower engine cranks but does not start?
    • M
      muellermichaelAug 15, 2025
      If the Echo Blower engine cranks but doesn't start, the issue might be a lack of fuel at the carburetor or a clogged fuel strainer. Try cleaning these components. If the fuel line is clogged or there is a problem with the carburetor, it is best to seek assistance from an authorized Echo dealer.
  • O
    ostephensAug 20, 2025
    What to do if there is no spark at the end of the Echo PB-600 Blower plug wire?
    • J
      Jennifer CrawfordAug 20, 2025
      If there is no spark at the end of the plug wire on your Echo Blower, first ensure the switch is turned on. If the problem persists, it could be due to an electrical issue or the interlock switch; in either case, it is best to seek assistance from an authorized Echo dealer.
  • P
    Patrick MolinaAug 26, 2025
    Why does my Echo PB-600 Blower engine run poorly?
    • J
      Joshua MitchellAug 26, 2025
      If the engine runs poorly, several factors could be at play. A dirty air filter, fuel filter, or plugged fuel vent can cause issues; in such cases, clean or replace the air filter, and replace the fuel filter and fuel vent. The spark plug might need cleaning, adjusting, or replacement. Carburetor adjustments may be necessary. Additionally, a plugged cooling system or spark arrestor screen could be the culprit, requiring cleaning.
  • B
    Bailey HernandezAug 30, 2025
    How to fix an Echo PB-600 Blower that does not work or is weak?
    • K
      Keith JohnsonAug 30, 2025
      If the Echo Blower is not working, or the air flow is weak or uneven, check the blower pipe for clogs and unclog it. Also, check for loose or damaged parts and tighten them. If this doesn't resolve the issue, consider replacing the blower.
  • A
    Austin JacksonSep 4, 2025
    What to do if there is no fuel at the cylinder of Echo PB-600 Blower?
    • A
      Ashley OliverSep 4, 2025
      If there is no fuel at the cylinder of your Echo Blower, it is best to seek assistance from an authorized Echo dealer.

Echo PB-600 Specifications

General IconGeneral
Air Volume1020 cfm
Air Speed233 mph
Dry Weight22.9 lbs
Fuel Capacity1.3 L
Weight9.5 kg
Fuel Tank Capacity1.3 L

Related product manuals