20
Component/System
Maintenance
Procedure
Before
Use
Every
Refuel
Daily or
Every 4
Hours
3
Months
or 100
Hours
6 Months
or 300
Hours
Yearly or
600 Hours
Air Filter Inspect/Replace I/C I/C R*
Fuel Strainer Inspect/Replace
IR
Fuel Line Inspect/Replace II R*
Carburetor Inspect/Replace I/C R(1)
Choke System Inspect/Replace
I
Cooling System Inspect/Clean I/C I/C
Muffler Spark Arrestor Inspect/Clean/Replace I/C* R*
Recoil Rope Inspect/Clean II*
Fuel Leaks Inspect/Repair
II
Spark Plug Clean/Replace I/C* R
Ignition System Clean/Replace No Maintenance required for coil and flywheel
Screws/Nuts/Bolts Inspect/Tighten/Replace
I*
I = INSPECT, C = CLEAN, R = REPLACE
MAINTENANCE
Your ECHO blower is designed to provide many hours of trouble free service. Regular scheduled maintenance will help
your blower achieve that goal. If you are unsure or are not equipped with the necessary tools, you may want to take your
unit to an ECHO Service Dealer for maintenance. To help you decide whether you want to DO-IT-YOURSELF or have the
ECHO Dealer do it, each maintenance task has been graded. If task is not listed, see your ECHO Dealer for repairs.
SKILL LEVEL
Level 1 = Easy to do. Most required tools come with unit.
Level 2 = Moderate difficulty. Some specialized tools may be required.
Level 3 = Experience required. Specialized tools are required. Echo recommends the unit be returned to your Echo
Dealer for servicing.
ECHO offers REPOWER
TM
Maintenance Kits and Parts to make your maintenance job easier. Just below each task
heading are listed the various part numbers required for that task. See your ECHO dealer for these parts.
MAINTENANCE INTERVALS
IMPORTANT
Time intervals shown are maximum. Actual use and your experience will determine the frequency of required
maintenance.
*All recommendations to replace are based on finding damaged or wear during inspection.
(1) Replacement will be required for Commercial use after 600 hours. For Consumer use, cleaning every 6 months is required.
Cleaning includes rebuild kits.
To Next Page
Loading...
