30
SPECIFICATIONS
MODEL -----------------------------------------------------PPT-260
Length (Standard) ----------------------------------------- 2.76 m (9 ft. 1 in.)
Length (Extended) -----------------------------------------3.90 m (12 ft. 10 in.)
Length w/extension----------------------------------------5.44 m (17 ft. 10 in.)
Width--------------------------------------------------------.23 m (9.06 in.)
Height ------------------------------------------------------- .22 m (8.7 in.)
Weight (dry) ------------------------------------------------7.7 kg (16.9 lb.)
Engine Type ------------------------------------------------ Air cooled, two-stroke, single cylinder gasoline engine
Bore----------------------------------------------------------34.0 mm (1.34 in.)
Stroke--------------------------------------------------------28.0 mm (1.10 in.)
Displacement -----------------------------------------------25.4 cc (1.55 cu. in.)
Exhaust System --------------------------------------------Spark Arrestor Muffler w/catalyst
Carburetor --------------------------------------------------Walbro with Purge
Ignition System --------------------------------------------CDI (capacitor discharge ignition)
Spark Plug --------------------------------------------------NGK BPMR-8Y Gap 0.65 mm (0.026 in.)
Fuel ----------------------------------------------------------Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio ----------------------------------------------- 50:1 two-stroke air cooled engine oil
Gasoline ----------------------------------------------------- Use 89 Octane [R+M/2] (mid grade or higher) gasoline known to be
good quality. Gasoline may contain up to 10% Ethanol (grain
alcohol) or 15% MTBE (methyl tertiary-butyl ether). Gasoline
containing methanol (wood alcohol) is NOT approved.
Oil ------------------------------------------------------------Power Blend
TM
Premium Universal 2-Stroke Oil
Fuel Tank Capacity ---------------------------------------- 0.55 lit. (18.6 US fl. oz.)
Starter System ---------------------------------------------- Automatic Recoil Starter
Clutch -------------------------------------------------------Centrifugal Type
Sprocket Type ----------------------------------------------6 tooth spur, 9.53 mm (3/8 in.) pitch
Power Transmission Shaft Assembly ------------------- Aluminum Extrusion
Gear Case Ratio --------------------------------------------1.5:1
Oiling System-----------------------------------------------Automatic
Saw Chain Oil Capacity -----------------------------------225 ml (7.6 oz.)
Handle ------------------------------------------------------- Right hand grip w/throttle trigger and lockout
Shoulder Harness ------------------------------------------ Standard
Idle Speed (RPM) ------------------------------------------ 2,750 - 3,250
Clutch Engagement Speed (RPM) -----------------------3,600 - 4,200
Wide Open Throttle Speed (RPM)-----------------------9,500 - 11,500
Guide Bar and Saw Chain (91) ---------------------------305 mm (12 in.); 9.53 mm (3/8 in.) pitch , 0.050 gauge
IMPORTANT This spark ignition system complies with Canadian ICES-002
To Next Page
Loading...
Need help?
General