EasyManuals Logo
Home>Echo>Brush Cutter>SRM-210 - 11-03 SERIAL NUMBER 07001001-07004401

Echo SRM-210 - 11-03 SERIAL NUMBER 07001001-07004401 User Manual

Echo SRM-210 - 11-03 SERIAL NUMBER 07001001-07004401
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
18
STARTING WARM ENGINE
The starting procedure is the same as Cold Start except DO NOT close
the choke, and do not depress throttle trigger to wide open position.
WARNING DANGER
The attachment should not move at idle, otherwise serious personal
injury may result.
NOTE
If attachment moves, readjust carburetor according to “Carburetor
Adjustment” instructions in this manual or see your ECHO Dealer.
1. Stop Switch
Move stop switch button (A) away from the STOP position.
2. Primer
Pump primer bulb (C) until fuel is visible and flows freely in the clear
fuel tank return line. Pump bulb an additional 4 or 5 times.
3. Recoil Starter
Lay the unit on a flat area and keep movable attachment parts clear
of all obstacles. Rapidly pull recoil starter handle/rope (D) until
engine fires.
NOTE
If engine does not start after 5 pulls, use Cold Start Procedure.
D
A
C

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Echo SRM-210 - 11-03 SERIAL NUMBER 07001001-07004401 and is the answer not in the manual?

Echo SRM-210 - 11-03 SERIAL NUMBER 07001001-07004401 Specifications

General IconGeneral
BrandEcho
ModelSRM-210 - 11-03 SERIAL NUMBER 07001001-07004401
CategoryBrush Cutter
LanguageEnglish

Related product manuals