Echo SRM-211 - SPECIFICATIONS; Model Identification; Engine and Fuel Specifications; Performance and Dimensions

14
SPECIFICATIONS
* Install and use U-Handle when operating any model with blade.
MODEL
SRM-211
SRM-211U
Length
1770 mm (69.7 in.)
Width
245 mm (9.65 in.)
680 mm (26.8 in.)
Height
225 mm (8.86 in.)
415 mm (16.3 in.)
Weight (dry) w/cutter head
5.3 kg (11.6 lb.)
5.75 kg (12.7 lb.)
Engine Type
Air cooled, two-stroke, single cylinder gasoline engine
Bore
32.2 mm (1.268 in.)
Stroke
26.0 mm (1.02 in.)
Displacement
21.2 cc (1.29 cu. in.)
Exhaust
Spark Arrestor Muffler w/catalyst
Carburetor
Zama diaphragm model C1U w/primer
Ignition System
Flywheel magneto, capacitor discharge ignition type
Spark Plug
NGK BPM-7A Gap 0.65 mm (0.026 in.)
Fuel
Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio
50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline
89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil
50:1 ECHO High Performance, two-stroke air cooled engine oil
Fuel Tank Capacity
0.45 lit. (15.8 US fl. oz.)
Recoil Starter System
Automatic Recoil Starter
Clutch
Centrifugal Type
Drive Shaft
1/4" Flex Shaft
Rotating Direction
Counter-Clockwise viewed from top
Cutter Head
Nylon line head (2-line) with .095 Crossfire™ Line capacity 13m (40 ft.) Optional:
U-Handle Kit, 8 cutter blade (8 in.); 22-tooth blade (8 in.); Circular saw (8 in.)
MAXI-CUT, TRI-CUT, UNIVERSAL HEADS, Rapid Loader Head, Sprink Klean
Handle*
Front - Loop and Right Rear Handle
w/rubber grips
U-Handle
Shoulder Harness
Optional
Standard
Idle Speed RPM
2800 - 3200
Wide Open Throttle Speed (W.O.T.) RPM
8000 - 9000
9500 - 11000