Gr a s s Tr i m m e r /Br u s h Cu T T e r
Op e r a T O r 's ma n u a l
9
co n t e n t s
After opening the carton, check for damage. Immediately notify your retailer or ECHO Dealer of damaged or missing
parts. Use the contents list to check for missing parts.
_____ 1 - Power Head w/Upper Drive Shaft Assembly
_____ 1 - Lower Drive Shaft Assembly
____ 1 - Operator's Manual
____ 1 - Safety Manual
___ 1 - Warranty Registration Card
____ 1 - Plastic shield
____ 1 - Shield plate
____ 3 - 5 mm x 16 mm screws (shield mounting)
____ 1 - Locking tool
____ 1 - Nylon Trimmer Head
_____ 1 - T27 Torx L-Wrench
____ 1 - Safety Glasses
____ 1 - Echo Power BlendX
TM
2-stroke oil sample
as s e m b l y
p o w e r
h e a d s h a f t /l o w e r s h a f t a s s e m b l y
D
A
B
Tools Required: None
Parts Required: Split Boom Attachment Assembly
1. Set Power Head/Shaft Assembly on a level surface.
2. Pull locator pin (A) out, and turn counter-clockwise 1/4 turn to lock-
out position.
3. Remove vinyl cap from attachment drive shaft.
4. Remove cardboard spacer, if necessary.
To Next Page
Loading...
