12
PRE - OPERATION
OPERATION
WITH BLADES
Preparing the Trimmer/Brush Cutter for Blade Use
WARNING DANGER
Blade use DEMANDS specific Brush Cutter configuration. Operation without specified shield, handle, and harness
can result in serious personal injury. Follow installation instructions included in optional kits.
FRONT HANDLE INSTALLATION
Tools Required: Screwdriver
Parts Required: Front Handle Assembly
1. Position front handle for comfortable operation and secure screws.
A
C
B
Grass/Weed Blades Require:
Install Blade Conversion Kit, P/N 99944200415 -
Includes metal shield (A), barrier bar (B), and
shoulder harness (C).
NOTE
The Barrier Bar is NOT A HANDLE and should
not be gripped when using or carrying the unit.
NOTE
The Barrier Bar is used to restrict rearward movement of the unit. For heavy-duty or extended use, U-handles should
be used. See your Echo dealer or Trimmer/Brush Cutter Safety Manual for details regarding U-Handles. If you have
additional questions, contact your Echo Service Dealer, or call Echo directly at 1-800-673-1558.
To Next Page
Loading...
Need help?
General
