Echo SRM - 260S User Manual

Grass Trimmer/Brush Cutter
Operator's Manual
MODELS SRM - 260
SRM - 260S
Serial Number 03001001 - 03999999
WARNING DANGER
Read rules for safe operation and instructions carefully. ECHO provides an
Operator's Manual and a Safety Manual. Both must be read and understood for
proper and safe operation. Failure to do so could result in serous injury.
X7502095601
X750001841
07/01

Echo SRM - 260S Specifications

General

Engine Type	2-stroke
Displacement	25.4 cc
Handle Type	Loop handle
Carburetor	Diaphragm
Shaft Type	Straight
Weight	5.8 kg

Summary

SAFETY INFORMATION

Manual Safety Symbols

Explains symbols and keywords for safety alerts and warnings.

INTERNATIONAL SYMBOLS

Safety and Hazard Symbols

Symbols indicating warnings, dangers, and hazards during operation.

PERSONAL CONDITION AND SAFETY EQUIPMENT

Personal Protective Equipment

Requirements for eye, hand, and hearing protection.

EQUIPMENT CHECKS AND SAFETY

Approved Attachments and Unit Inspection

Use of approved attachments and checks for unit integrity.

SAFE OPERATION PRACTICES

OPERATION WITH BLADES

Blade Preparation and Selection

Preparing unit and choosing correct blade for material.

PRE-OPERATION FUEL MANAGEMENT

Fuel Requirements and Mixing

Specifications for gasoline/oil and fuel mixing instructions.

Safe Fuel Handling Practices

Precautions for handling, storing, and refueling fuel.

ENGINE OPERATION

Starting a Cold Engine

Step-by-step procedure for starting a cold engine.

Starting a Warm Engine

Procedure for starting the engine when warm.

Stopping the Engine

Method for safely shutting down the engine.

MAINTENANCE SCHEDULE AND SKILL LEVELS

Recommended Maintenance Intervals

Chart detailing service frequency for various components.

ROUTINE MAINTENANCE TASKS

Air Filter Maintenance

Instructions for cleaning or replacing the air filter element.

Spark Plug Service

Inspecting, cleaning, and adjusting the spark plug.

EXHAUST SYSTEM MAINTENANCE

ENGINE SYSTEM MAINTENANCE

CARBURETOR ADJUSTMENT AND BREAK-IN

Engine Break-In and Idle Adjustment

LUBRICATION PROCEDURES

NYLON LINE REPLACEMENT

Trimmer Line Replacement Steps

METAL BLADE SHARPENING

8-Tooth Blade Sharpening Technique

TROUBLESHOOTING

STORAGE GUIDELINES

Long Term Storage Maintenance